c. NOW POWER UP BOTH UNITS!
d. Make sure the D7A is on the two meter band and
the channel is set to 144.390.
e. OK here we go! Press the [TNC] button on the
D7A. This will open the {TNC} of your D7A and
communications between the Geosat 6 APRS and D7A
should now begin. NOTE: Make sure that the radio
isn’t in [TNC PACKET] mode.
f. DOES IT WORK?? Press the [POS] button. This will
bring up the coordinates screen. IF the Geosat 6 APRS
is talking to the D7A you should see the (degrees,
periods and commas) blinking. if they are not blinking
you are NOT communicating. Press the [POS] button
again to return to the normal user screen.
APRS Functions
32 - AvMap
Comments to this Manuals