AvMap G6 Specifications download pdf (Page 26)

or correctly seated.

1. Remove one plug and assure that it is the correct

plug for that unit and is plugged into the correct port,

according to the description in the previous section

of these instructions. Return the plug to the proper

port and rmly push it in.

2. Check that the cord at the other end is in the cor-

rect port and rmly press on the plug to assure it is

properly seated.

3.Check the cord for continuity and no shorts, using

an ohmmeter, especially if it is a home brewed data

cable.

4. Verify that the Geosat 6 APRS is computing a posi-

tion x.

5. Listen to your APRS frequency on the TH-D72A/E

or on a different radio to verify there is APRS activity

in your area.

6. Reread and verify the setup sections of these in-

structions.

7. Perform a Partial Reset of your TH-D72A/E per the

instructions on page RESET-1 of the CD manual, then,

repeat the setup instructions. A partial reset will not

erase your memory channels, but will set all other

settings to their default values.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33 34

No comments

AvMap G6 Specifications Page 26