Avmap GeoPilot Plus User Manual download pdf (Page 28)

3.5.4 Setup Data Fields

You can select the item to be displayed in each of the fields of the Data Window. The following

figure displays the options available. The fields selected for each window mode option (1-line, 2-

lines, etc.) are independent; therefore, you can select different fields for each window view.

> ‘MENU’ + “SETUP DATA FIELDS” + ‘ENT’

After pressing ‘ENT’, a box in the Data Window will be highlighted. Using the cursor key, select the

box to be edited and press ‘ENT’. The OPTIONS box will appear (see previous figure) allowing you

to select the item to display in the highlighted is box. Highlight the desired item from the list and

press ‘ENT’ to accept. You can then scroll to another box and proceed as above. Once all boxes are

set up, press ‘ESC’ to exit.

Fig. 3.5.4 - Setup Data Fields

Note

Dest. Wpt on the GeoPilot uses 2 fields. Still must be the top field, or the top left when in HSI + Fields mode.

3.5.5 Default Datafields

This will restore data fields settings to default values

> ‘MENU’ + “DEFAULT DATA FIELDS” + ‘ENT’

The message “DONE” will appear to the right confirming the action is complete. The Default Fields

will only be applied to the currently selected Data Window Option.

3.5.6 Map Orientation

Map Orientation controls the direction that the Moving Map is pointing during Home and Auto

Zoom modes.

> ‘MENU’ + “MAP ORIENTATION” + ‘ENT’

The options are:

Track-up - will rotate the map automatically to keep your Track pointed toward the top of the

display (see Par. 14.2.6; System Setup + Fix Setup + Head Up Response).

Course-up - will rotate the map automatically to keep your active leg pointed toward the top of

the display.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 92 93

No comments

Avmap GeoPilot Plus User Manual Page 28